Click image to view full size image
INVERTER ACDC TIG/MMA/CUT MACHINE TC164
IGBT advanced double inverter technology
Single phase power supply: 1X220/230/240V50/60Hz Fuse 14.7/20.7A
Light weight.
HF arc start for TIG&CUT, arc force for MMA
2T/4T and pulse control function for TIG
AC/DCTIG suitable for steel, stainless steel, aluminm.
Digital display
Can be with foot controller.
Welding cable 3m+300A holder, welding cable 3m+300A earth clamp, TIG&CUT torch 4m, gas hose 2m.
Over hot and current protection.
Input Voltage: 1x220/230/240V 50/60Hz
Input Power: 4.8KVA
No load voltage: 60~80V(Welding)/ 200V(CUTTING)
Current: 5~160A(Welding)/15~40A(Cutting) Duty cycle: 35%
Current up-slope time: 0~10s Gas post flow time: 1~25s Current down-slope time: 0~10s
SP value (balance): 30~70% AC frequency: 20~100Hz(250Hz)
IGBT advanced double inverter technology
Single phase power supply: 1X220/230/240V50/60Hz Fuse 14.7/20.7A
Light weight.
HF arc start for TIG&CUT, arc force for MMA
2T/4T and pulse control function for TIG
AC/DCTIG suitable for steel, stainless steel, aluminm.
Digital display
Can be with foot controller.
Welding cable 3m+300A holder, welding cable 3m+300A earth clamp, TIG&CUT torch 4m, gas hose 2m.
Over hot and current protection.
Input Voltage: 1x220/230/240V 50/60Hz
Input Power: 4.8KVA
No load voltage: 60~80V(Welding)/ 200V(CUTTING)
Current: 5~160A(Welding)/15~40A(Cutting) Duty cycle: 35%
Current up-slope time: 0~10s Gas post flow time: 1~25s Current down-slope time: 0~10s
SP value (balance): 30~70% AC frequency: 20~100Hz(250Hz)
| Model | TC164 AC/DC | TC205 AC/DC | |
| Input | voltage | AC220/230/240V 50Hz | AC220/230/240V 50Hz |
| AC TIG | No load voltage | 60-80V | 60-80V |
| Base Current Adjusting range | 20-160A | 20-200A | |
| AC balance | 30-70% | 30-70% | |
| AC square wave frequency | 20-100Hz | 20-250Hz | |
| Rated Duty Cycle | 35% | 35% | |
| DC TIG |
Pulse current adjusting range | 5-160A | 5-200A |
| Rated Duty Cycle | 35% | 35% | |
| Current down-slope time | 0~10S | 0~10S | |
| Base Current Adjusting range | 5-160A | 5-200A | |
| Pluse Width Ratio | 0.1~0.9 | 0.1~0.9 | |
| Pluse Frequency | 0.5~25Hz | 0.5~25Hz | |
| After flow time | 1~25S | 1~25S | |
| Arc starting Mode | High frequency arc striking | High frequency arc striking | |
| DC MMA | No load voltage | 60-80V | 60-80V |
| Base Current Adjusting range | 5-160A | 5-200A | |
| Rate output current | 160A | 200A | |
| Rated Duty Cycle | 35% | 35% | |
| CUT | (Base) Current Adjusting range | 15-40A | 15-50A |
| Rated Duty Cycle | 35% | 35% | |
| Max Cutting thickness | 8 | 12 | |
| Efficiency | ≥83% | ≥83% | |
| Weight | 49KG | 51KG | |
| Protection Class of enclosure | IP21S | IP21S | |
| Outline dimensions mm2 | 430X200X290 | 430X200X290 | |
| Accesorries | TIG welding torch WP-26/Cutting torch WSD-60/ Welding clamp/Welding holder/Gas inlet pipe/ Air pressure Regulator etc |
||